Sash Clamp
Source: Thingiverse by agmcmll
The Sash Clamp is a free printable 3D model from Thingiverse by agmcmll. This is a 3d printable sash clamp. You can download the STL file from the original listing below and print it at home.
About this model
This is a 3d printable sash clamp. Long clamps are expensive, this is a low cost alternative, the length is limited only by the length of the wood board used as the bar. The width of the board to use is 3/4" or 19mm. This clamp uses 1/2" or 12mm bolt and nut to provide the clamping force. The parts are mounted to the board using 5/16" or 8mm bolts. Updated: there is now a simple method to attach the foot without having to grind the bolt. an inner foot threads onto the bolt, and an outer one just clicks over the inner. If need be the inner one can be glued to the bolt, but mine hasn't loosened yet, so it probably isn't necessary. Old method: The foot should be retained to the clamping bolt. first by grinding a groove to the root of the threads, about 1/2' or 12mm from the end of the bolt. R…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Sash Clamp is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by agmcmll.
- Who made this model?
- Designed by agmcmll, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Sash
![Nora, Halfling Barmaid [Pre-supported] 3D model](https://dl2.myminifactory.com/object-assets/631e868809b86/images/230X230-nora.jpg)
