32x8 LED Matrix grid for diffuser
Source: Thingiverse by peaberry
The 32x8 LED Matrix grid for diffuser is a free printable 3D model from Thingiverse by peaberry. This is a 10mm grid to fit over a 32x8 LED matrix, as part of a diffuser panel for the LED matrix. You can download the STL file from the original listing below and print it at home.
About this model
This is a 10mm grid to fit over a 32x8 LED matrix, as part of a diffuser panel for the LED matrix. As the full 32x8 grid would be too long to fit on some print beds, this was designed to be printed twice, and the two 16x8 parts will fit together. The squares are spaced on a regular 10mm square grid, their internal size is 9.2mm and the walls between each square are 0.8mm thick. For a 32x8 matrix, you would print "32x8_matrix_v09.stl" twice. For a larger matrix (e.g. 64x8 or 128x8), you would print "32x8_matrix_v09.stl" twice, and print as many "matrix_middle_v10.stl" as you need. The "panel_end.stl" and "panel_mid.stl" are optional printable diffuser panels to cover the grid (note that I haven't tried these personally, as I used paper and perspex sheet to cover my own matrix). The LED matr…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 32x8 LED Matrix grid for diffuser is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by peaberry.
- Who made this model?
- Designed by peaberry, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 32x8
