Logitech MX Ergo Mid Body Stand
Source: MakerWorld by SYST3M_OVERIDE
The Logitech MX Ergo Mid Body Stand is a free printable 3D model from MakerWorld by SYST3M_OVERIDE. This is an all in one solution for your Logitech MX Ergo. You can download the STL file from the original listing below and print it at home.
About this model
This is an all in one solution for your Logitech MX Ergo. The mouse sits at 45°. It uses the original metal base and is held on with up to 6 10x2mm magnets (you only really need 3) and it's recessed so there's no risk of the base sliding off. The mouse itself is held on with 4 8x2mm magnets that may need to be glued in, just make sure to put them in the proper polarity that's unique to each mouse ( I have 2 MX Egro mice and the 4 magnets in the bottom of each mouse isn't the same so it pushes one mouse off while holding the other on). The distance from the edge of the mouse to the desk is about 2mm. Print Settings Rafts:Yes Supports: Yes Resolution:0.12 Infill: +15% Notes: I highly suggest printing at 0.12 or lower as the tolerances are quite tight for the base plate. Here's a link to the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Logitech MX Ergo Mid Body Stand is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by SYST3M_OVERIDE.
- Who made this model?
- Designed by SYST3M_OVERIDE, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in logitech
