Chisel Sharpening Jig
Source: MakerWorld by hercules117
The Chisel Sharpening Jig is a free printable 3D model from MakerWorld by hercules117. This is a chisel sharpening jig. You can download the STL file from the original listing below and print it at home.
About this model
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side is facing upward. The flat side of the chisel must be referenced against the upper lip of the vise. After printing, you will need to cut through the bridging layer of the holes. You also may need to drill through the external holes with a ¼" bit. Mine were a little tight, and you want the mobile jaw to move smoothly.Sharpening distances from the front face to the chisel tip:lower vise 25deg: 41mmlower vise 30deg: 30mmupper vise 25deg: 62mmupper vise 30deg: 47mmRequired hardware:M8 x 20mm hex head bolt (2)M8 Nylock nut (2)608 bearing (2)¼-20 x 3in hex head…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Chisel Sharpening Jig is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by hercules117.
- Who made this model?
- Designed by hercules117, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in chisel
More from hercules117
