Is this 3D model free to download?

Yes, Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by makersark3d, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers 3D printable model by makersark3d

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers photo 1

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers photo 2

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers photo 3

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers photo 4

Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers

Source: MakerWorld by makersark3d

The Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers is a free printable 3D model from MakerWorld by makersark3d. Parts required : Slim 23/20 mm thick stepper motor BMG extruder /clone E3D V6 hotend/clone30x10 mm blower fan 24v recommend M3x8mm bolts x 5M3x16mm blots x2 M3x20mm bolts+nuts. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

125 saves Source: MakerWorld Updated 2026-10-27 License: CC-BY-NC-SA · non-commercial 9 makes Category: 3D Printer

Tags: upgrade, extruder, bmg, cartridge, enclosure, hotend, creality, ender, e3dhotend, e3dv6, ender3, toolhead, bmgextruder, bedslinger

About this model

Parts required : Slim 23/20 mm thick stepper motor BMG extruder /clone E3D V6 hotend/clone30x10 mm blower fan 24v recommend M3x8mm bolts x 5M3x16mm blots x2 M3x20mm bolts+nuts x2M3 brass inserts x65x3 mm neodymium magnets Modifications required:Vent holes drilled in the aluminum carriage One extra 3.5 mm hole drilled for fitting Body P1 to the carriage and Bracket P1 assembly Offsets needed to be adjusted in firmware due to the nozzle changing position

Frequently asked questions

Is this 3D model free to download?: Yes. Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by makersark3d.
Who made this model?: Designed by makersark3d, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.