Rings for a DIY shroud (light shield) — Sky-Watcher 200P Flextube
Source: Thingiverse by jimochiri
The Rings for a DIY shroud (light shield) — Sky-Watcher 200P Flextube is a free printable 3D model from Thingiverse by jimochiri. These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope. You can download the STL file from the original listing below and print it at home.
About this model
These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope. Testing showed that a single ring is not enough to hold the shroud's shape reliably — use two rings per shroud. You will need per set (2 rings = 8 parts total): 8× M3 nuts 8× M3×25 flat-head (countersunk) bolts Shroud fabric notes (not included, for reference): Made from double-layer blackout fabric with a simple pattern: Length: 44 cm (+ extra allowance for the drawstring channels/casings) Width: 100 cm Velcro strip along the seam Loops sewn on the inside for attaching the rings
Frequently asked questions
- Is this 3D model free to download?
- Yes. Rings for a DIY shroud (light shield) — Sky-Watcher 200P Flextube is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by jimochiri.
- Who made this model?
- Designed by jimochiri, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 8 inch dobsonian
